CBYHF - AP ARMAFLEX SHEETS AND ROLLS

Product Identification

Product ID:AP ARMAFLEX SHEETS AND ROLLS
MSDS Date:03/04/1994
FSC:5640
NIIN:00N072474
MSDS Number: CBYHF

Responsible Party
ARMSTRONG WORLD INDUSTRIES INC
313 WEST LIBERTY ST
LANCASTER, PA 17604
US

Emergency Phone: 717-396-2328

Info Phone: 713-396-2935

Cage: 03938

Contractor
ARMSTRONG WORLD INDUSTRIES, INC.
3209 LANCASTER, PA 17604 US

Telephone: 717-396-2328; 717-396-2935

Cage: 03938

Ingredients

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS CLASSIFIED AS AN
"ARTICLE" ACCORDING TO TITLE 29 OF THE CODE OF FEDERAL REGULATIONS,
OSHA PART 1910.1200(C). THEY ARE FORMED TO A SPECIFIC SHAPE OR
DESIGN DURING MANUFACTURE, HAS END U SE FUNCTIONS DEPENDENT UPON
THEIR SHAPE& DESIGN, & DOES NOT RELEASE ANY HAZ CHEMICAL UNDER
NORMAL CNDTNS OF USE.
Explanation of Carcinogenicity:NOT RELEVANT

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Fire Fighting

Extinguishing Media:WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NOT APPLICABLE.
Ventilation:NOT APPLICABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
APPEAR/ODOR:COMPOUND. IT COMES IN VARIOUS SIZES & IN SEVERAL FORMS;
E.G., PIPE INSULATION, SHEET INSULATION & INSULATING TAPE.

Chemical Properties

Appearance and Odor:BLACK. THIS PROD IS AN EXPANDED, CLSD-CELL,
SULFUR-CURED RUBBER TYPE (SUPDAT)

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.